CNC LATHES
      1 BULLARD - VTL
              71" swing, 35" height/length
      2 Monarch Ultra Center
              Twin spindle (15" main, 13" sub), 6 axis with Live Tooling, 24" max swing.
      1 DAEWOO PUMA 400
              28" swing, 41" between centers, 4 5/8" hole thru spindle      
      1 OKUMA LH-40-N
              30" swing, 118" between centers, 7" over the slide     
      1 DAEWOO PUMA 10HC
              19 1/2" swing, 14" between centers            
      1 TAKISAWA TS-10
              3 axis mill turn, barfeed capabilities up to 1 5/8", add’l chuck up to 6" dia.

CNC MILLS
Vertical
      OKK VERTICAL MACHINING CENTER MODEL 820
              20 HP, 3,000 RPM, max. Load on table 4,400 lbs., X – 62.9"  Y – 32.2"  Z – 28.3"
      OKK VERTICAL MACHINING CENTER MODEL 800
              20 HP, 3,000 RPM, max. Load on table 4,400 lbs., X - 63 1/2"  Y - 31 1/2"  Z - 29"
      OKUMA-HOWA NO. 5 VERTICAL MACHINING CENTER
              10 HP, 3650 RPM, max. Load on table 2,200 lbs., X - 39"  Y - 23"  Z - 21", w/ SMW               rotary table-model RT 315 -w/ indexing to .001 of a degree
      MAZAK VTC 41
              7 HP, 7,000 RPM, max. Load on table 300 lbs., X - 22"  Y - 16"  Z - 20"          
Horizontal
      2 OKK MACHINING CENTER MODEL 700
              20 HP, 3,000 RPM, X - 59"  Y - 31 1/2"  Z - 31 1/2", 5th axis table
      1 OKK MACHINING CENTER MODEL 560
              15 HP, 4,000 RPM, X - 28"  Y - 22"  Z - 22", w/ pallet changer
      2 MITSUBISHI MACHINING CENTER MODEL MPA H50A
              15 HP, 6,000 RPM, X – 24.8"  Y – 24.8"  Z – 19.7", pallet changer, 5th axis table
      1 OKK MACHINING CENTER MODEL 400
              15 HP, 3,000 RPM, X - 24"  Y - 18"  Z - 17", indexing table

MANUAL LATHES
      STANDARD MODERN ENGINE LATHE
              17" swing, 48" between centers, 3 1/4" hole thru spindle
      STANDARD MODERN ENGINE LATHE
              20" swing, 60" between centers, 3 1/4" hole thru spindle
      WAFUM ENGINE LATHE
              24" swing, 10 ft. between centers, 5 5/8" hole thru spindle
      KING VERTICAL TURRET LATHE
              40" swing, 30" height, 40 HP, w/ digital readout to .0001

MANUAL MILLS
      3    BRIDGEPORT # 1 - 1-1 1/2 HP, w/ digital readouts to .0001 and power feeds

BROACH
      1    RED RING HDE-5-60 -  5 ton horizontal broach, w/ 60" stroke

GEAR SHAPER
      1 FELLOWS - with 19" riser

INSPECTION EQUIPMENT
      ZEISS/Numerex CMM              
            H - 18"  D - 28"  L - 28"                                 
      Profilometers                                                      
      ID and OD micrometers to 24"                            
      ID and OD verniers to 60"                                    
      Gage block sets                                                  
      Groove micrometers to 8"
      Granite inspection surface plates
      Optical Comparator .0001 resolution
      Hardness tester
      Depth micrometers to 12"
      Dial bore gages to 24"
All inspection equipment is calibrated and certified traceable to the NIST.

MATERIAL HANDLING
      1     NISSAN forklift- 5000#                                             
      1     WHITE forklift – 5,000 lbs.
      1     TOYOTA forklift- 5000#
      4     Pallet jacks up to 2,000 lbs
      2     1 - Ton electric boom hoists
      3     1/2 - Ton electric boom hoists
      4     300# - Production hoists
      1     Weight scale up to 3,000
      Misc. chains, nylon straps, magnetic lifting plates, lifting clamps, and dollies

SAWS
      1     DOALL - 12" x 16" automatic saw                              
      1     SUPER BROWN - cold saw w/ air vise
      1     KALAMAZOO - 6" x 10" cut off
      1     GROB - 24" vertical band saw     
      2     ABRASIVE - cut off                                      

GRINDERS
      1     DOALL - 6" x 18" surface grinder                               
      1     STERLING - drill grinder                                          
      1     DELTA TOOLMAKER - grinder
      6     Grinders

DRILLS                                                  
      1    RADIAL ARM DRILL - 4 ft., 10 HP                           
      2    5 Station drill presses                                                 
      3    20" floor models  

WELDERS                                                  
      1     PANASONIC ROBOTIC WELDER
      1     MILLER - Wire feed welder
      2     Gas Welders
      1     Arc Welder

MISCELLANEOUS
      1     50 TON HYDRAULIC PRESS
      4     BELT SANDERS - 1" - 6" width
      3     SUNNEN HONES  
      1     TAP BURNER  
      2     AIR FEED TAPPING TABLE